MIC GAIN:-10 to +60dB (-10dB Pad)

LINE GAIN:-16 to +44dB (-10dB Pad)*

PHANTOM POWER:48v +/-4v @ 10mA/Channel

MIC EIN:<-127.5dBu

CMRR:>80dB @ 100 to 10kHz

MAXIMUM INPUT LEVEL:+22dBu (+32dBu with Pad)

INPUT IMPEDANCE:Mic LO: 220Ω Balanced, Mic MED: 1k2Ω Balanced, Mic HI: 2k8Ω Balanced, Line (All Z): >6kΩ Balanced

FREQUENCY RESPONSE:+/-0.5dB 10Hz to 100kHz

CROSSTALK:<-85dBu @ 1kHz & 10kHz

THD+N @ 0dBu (1kHz):0.003% (-90.5dBu)

SNR:>90dB

HPF:Sweepable from 25Hz to 250 Hz, 2nd Order (12dB/Octave)

XLR:Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)

1/4” JACK:TIP (Hot), RING (Cold) & SLEEVE (Shield)

* Line input level at the combi jacks will be affected by the input impedance switch position, this can be used as a second pad control to adjust line input ranges on all channels.

D.I GAIN:-10 to +60 dB (-10dB Pad)

MAXIMUM INPUT LEVEL:+16dBu (typical), +22dBu

INPUT IMPEDANCE:1MegΩ Unbalanced

FREQUENCY RESPONSE:+/-0.5dB 10Hz to 50kHz

THD+N @ 0dBu (1kHz):<0.03% (-70dBu)

SNR:89dB

1/4” JACK:TIP (Hot) & SLEEVE (Shield)

MAXIMUM OUTPUT LEVEL:+27.5dBu

OUTPUT IMPEDANCE:<100Ω Balanced

MAXIMUM INPUT LEVEL:+18dBu

DIGITAL REFERENCE LEVEL:0dBFS = +18dBu

DINPUT IMPEDANCE:>10kΩ Balanced

FREQUENCY RESPONSE:+/-0.5dB 10Hz to Fs/2

CROSSTALK:<-80dBu @ 1kHz & 10kHz

THD+N @ -1dBFS (1kHz):<0.002% (-94dB)

THD+N @ -6dBFS (1kHz):<0.002% (-94dB)

DYNAMIC RANGE:113dB un-weighted, 115dB A-weighted

PEAK LED LINEUP:+16dBu (-2dBFS)

SIGNAL LED LINEUP:Variable Brightness from -30dBu to -10dBu (-28dBFS)

ADAT 8 CHANNELS SMUX:+44.1 – 96kHz

AES | S/PDIF 8 CHANNELS:44.1 – 96kHz

CLOCK:Internal or External

WORLDCLOCK INPUT:75Ω BNC, Optional 75Ω Termination

• High stability, low noise internal SMPS

• Fan-less, quiet operation

• Works anywhere in the world without reconfiguring

LINE VOLTAGES:90 to 264V (a.c)

INTERNAL RAILS:+/-18VDC, +48VDC & +5VDC

FUSE:T1A (1Amp Time Delay)

CONSUMPTION:Maximum 40 Watts

WEIGHT:4.0kg